Brake Lever Adjuster
Take control of your braking feel with the Pointer Racing Remote Brake Lever Adjuster. A 50cm steel cable links the adjuster dial to your brake lever, so you can fine-tune lever reach — the distance from the lever to the grip — quickly and without tools, dialling in the exact bite point that suits your hand size, glove thickness and riding conditions.
Detail Description
Take control of your braking feel with the Pointer Racing Remote Brake Lever Adjuster. A 50cm steel cable links the adjuster dial to your brake lever, so you can fine-tune lever reach — the distance from the lever to the grip — quickly and without tools, dialling in the exact bite point that suits your hand size, glove thickness and riding conditions. Consistent lever position is one of the fastest ways to sharpen braking control: no stretching for the lever mid-corner, no guessing where the bite starts. On track or on the road, repeatable feel means later, harder, more confident braking, lap after lap. * Remote Cable Adjustment: A 50cm steel cable routes the adjuster to a convenient position for fast, tool-free reach changes. * Two Interchangeable Heads: Includes two swappable adapter heads for broad lever compatibility. * Wide Fitment: Universal design fits most sportbike brake levers, including Brembo master-cylinder levers. * 7075 Aluminium: CNC-machined from aerospace-grade 7075 alloy — light, strong and built for track abuse. * Race-Bred: Developed by Pointer Racing from ARRC and CRRC race craft.
Pairs Well With
Shipping & Returns
Shipping & Returns
You might also want to check out these products.
-01KH5BZCX1WR44YVYRHJRG2VJK.jpg&w=3840&q=50)
Brake Lever Guard
Mandatory for most racing organisations, the Pointer Racing bar-end brake lever guard protects your front brake from accidental engagement during close-quarters racing. The reason it is a rule rather than a suggestion: in a bar-to-bar moment, another rider's fairing or hand catching your unguarded brake lever applies your front brake for you — at full lean, with no warning. The guard turns a contact that would have put you on the ground into a moment you ride out. * High-Strength Nylon: Chosen deliberately over alloy — it absorbs and flexes on impact rather than transmitting the load straight into the lever or bar. * Fits Everything: Supplied with adapters to suit essentially any handlebar on the market, so it goes on clip-ons and bars alike. * Universal Fitment: Not model-specific — move it between bikes as your garage changes. * Race Legal: Satisfies the lever-protection requirement at scrutineering. Fit it alongside our remote brake lever adjuster to finish the braking side of the cockpit.
A$89.00-01KH5CCY96WR5T8E7FN9NRQQSJ.jpg&w=3840&q=50)
Handlebar Grips
Upgrade your cockpit with the Pointer Racing Handlebar Grips — a precision-sized pair engineered for a locked-in, confident hold on both road and track. The left grip is sized ø22mm for the clutch-side bar and the right ø24mm to seat correctly over the throttle tube, so each side fits the way it should with no bunching or twisting. A dedicated anti-slip tread pattern keeps your hands planted under braking, hard acceleration and in the wet, while the durable rubber compound soaks up vibration to cut hand fatigue on longer rides and race stints. * Correct Dual Sizing: ø22mm clutch side and ø24mm throttle side for a proper factory-style fit. * Anti-Slip Grip: Textured rubber tread for secure hold in all conditions, wet or dry. * Open-Ended Design: Open ends leave room to run your preferred bar-end weights. * Choose Your Colour: Available in a range of colours — select your finish above.
A$29.00-01KH5E87E88EJFTNH37G0QSF0M.jpg&w=3840&q=50)
Yamaha R3 Handlebars
Sharpen your Yamaha R3's riding position with the Pointer Racing Clip-On Handlebars, CNC-machined for the 2019-2026 R3. The clip-on design drops and narrows your reach for a committed, aggressive stance that puts weight over the front end — exactly where you want it for precise corner entry and front-end feel on track. Each bar tube threads securely onto its clamp for a solid, rattle-free connection, and a fixed 6-degree downward angle sets a purposeful, race-focused wrist position straight out of the box — no guesswork, no slipping. * 7075 Aluminium: CNC-machined from aerospace-grade 7075 alloy for maximum strength at minimum weight. * True Clip-On Geometry: Lower, more forward position for sharper steering and front-end confidence. * Fixed 6° Drop: Committed race-oriented angle that loads the front tyre through corners. * Threaded Bar Mount: Bars thread onto the clamp for a secure, precise fit. * Anodised Black Finish: Hard-wearing anodised black as standard — blue and pink available on custom order. Fitment: Yamaha R3 2019-2026.
A$159.00